Ghost 2 Immobiliser Problems
The Ghost 2 immobiliser, designed to safeguard cars from hacking or key cloning, is a discrete device that can be put in place without causing any damage to your vehicle. It stops your vehicle from starting until you press a specific sequence of buttons within your vehicle like the password you enter on a mobile phone.
Stop/Start
Ghost immobilisers stop vehicles from being stolen by preventing the engine from starting until it has received the correct PIN code. This is done without altering the vehicle, and is largely undetectable by thieves. The unit communicates with the ECU on the CAN data bus to immobilise the vehicle. This system is similar to the one that car manufacturers have been using in their cars for years however, the criminal cannot add a new key or utilize key relay technology to bypass it like they can with factory fitted systems.
Ghost is compatible with any vehicle that has an engine, which includes motorhomes, vans, cars and caravans, as well as bikes. The same system can be utilized on electric vehicles. It's an excellent alternative to wheel clamps and steering wheel locks.
When the Ghost is activated, it will block all the buttons in your vehicle and stop the ignition from starting until a PIN code has been entered prior to. This can be done via the Android or Apple mobile app or by manually entering the code using your key fob. If the incorrect code is entered the app will display an indicator light. The Ghost will then not allow the vehicle to be restarted. This is a great method to deter thieves. If the vehicle can't be started the thieves will be able to move on.
The Ghost is tiny weatherproof device that is able to be hidden in the most difficult to reach areas of your vehicle. It is extremely easy to install, taking an average of 20-30 minutes per vehicle. It is also easy to remove if you decide to switch vehicles, or give it to the valet or service center parking. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognised by a number of insurance companies. It also comes with a secure emergency Pin Code Override, and a Service/Valet mode which can be activated by pressing a button in the app, or by using your key fob.
Disarm
Ghost immobilisers, unlike mechanical anti-theft devices that are able to be removed, are concealed in the car. They are near impossible to bypass or hack and, even if they are discovered, a burglar will not be able to start the engine. This is because a ghost immobiliser blocks key hacking, signal jamming and device spoofing, all of which are methods that are used frequently by thieves to gain access to vehicles with standard immobilisers.
An immobiliser operates by sending a code to the ECU (electronic control unit). If the wrong code is received and the vehicle is not started as the engine will not start up. It is possible to disable a ghost immobiliser using a software tool, but it would be extremely difficult and time-consuming to do so. Only an authorised installer can install and use the software.
The Ghost immobiliser is a small device that is tucked away in the wiring loom of the vehicle and is inaccessible to the naked eye once installed. It is not visible on diagnostic systems. There are no indicators with LEDs, and it isn't able to communicate with the engine via the OBD port. It communicates in a silent manner through the CAN data circuit.
The system will not allow the vehicle to start until it is given an input PIN number that is specified by the user. This can be entered using buttons on the steering wheel and door panels as well as the central console. This is a safer way to protect the car, because it doesn't need a remote control or key fob.
Ghost also comes with a service mode that is activated through the mobile application. This lets you hand over your keys to someone else to use for service or valet parking, without having to enter a disarm sequence.
You should never remove the system from your Ghost by yourself, no matter whether it's in service mode. This can damage your engine. It is best to contact an TASSA-certified installer who can safely and effectively remove the system. Our most recent GHOST immobilisers have a specific fingerprint QR sticker that is hidden in various areas of your vehicle. These are linked to our security register. In the event that the system is removed and later is sold on the blackmarket it will be able to trace the owner of the system.
Anti-Hijack
Ghost Immobiliser 2 has a extremely useful anti-hijack feature. This system works like a smart key and is among the most secure methods to protect your vehicle from theft. When ghost 2 immobiliser cost is turned to on and the vehicle is stationary for a period of 30 seconds, the Ghost system will automatically stall the engine and turn the hazards lights on. This gives the driver or passengers time to press a security button (depending on the vehicle) before the system is activated and the engine is once again allowed to begin.
The Ghost system, unlike many competitors, utilizes a timer and controller unit which shuts down the valve for shut-off of fuel 14 after a predetermined period of time. This happens even if the ignition remains on. The delay time interval needs to be long enough to allow the hijacked owner of the vehicle to drive away from the location of the incident and to maintain a sufficient distance from the vehicle in which it is stuck before the system can reactivate.
In addition to the standard CANbus immobiliser blocking features of the Ghost system, it comes with an extra security level that blocks common methods of hacking employed to gain access to modern vehicles like relay attacks, key range extending and ECU swapping. This is due to the fact that the Ghost system communicates in a quiet manner and does not emit signals that could be picked up by a thief using codes or RF scanning technology.
The Ghost system comes with a service / valet mode that allows your car to temporarily be started and driven without the requirement for a PIN code. This is ideal when you park your vehicle and need to be away for a short amount of time, for instance, to put your groceries in the boot or open a garage door. The system will exit service mode according to speed and duration or via the simple PIN code entry procedure, giving you complete security knowing that only YOU are able to use your vehicle!
Keyless Entry
Many consumers are now looking for extra security measures due to the increasing trend of car thefts using contactless technology. This is particularly relevant for those who have invested time and money into customising their vehicle or own rare/expensive automobiles. Immobilisers that are added to your vehicle can be an effective way to deter this type of theft since they prevent your vehicle from starting until correct pin code is entered along with your key fob.
Immobilisers are designed to impede the various circuits in a vehicle such as ones that control the starter motor and fuel pump. They can also disable the car alarm in order to attract attention and ward off potential thieves.
These devices connect directly to the engine control unit through the CAN data network and stop the thief from gaining access to it by installing a new ECU or using key programmers. The immobilisers are fitted in a discreet manner and leave no trace on your vehicle. They are also unnoticeable with the latest tools of thieves.
Unlike other systems that require a separate application or tag to be carried on the person of the driver the Ghost immobiliser is only disarmed by pressing a sequence of existing electronic buttons on your steering wheel, door panel, and centre console, allowing you to choose a custom pin sequence. The pin can easily be changed to make the device as secure as a credit card. It's also more difficult to break because it requires up to 20 press.
Ghost also has a Valet/Service mode, which permits you to deactivate it if you intend to give your vehicle for valet parking or service. This allows the system to function within certain parameters like a 30-mph speed limit. The system can be reactivated using the original key or corresponding entry code.
Installed by our accredited installers, it is the most secure and efficient aftermarket CAN-immobiliser that is available. It is also certified by Thatcham for insurance purposes. The Ghost 2 immobiliser comes with six QR fingerprint labels as well as an ISR contact card with your unique QR codes along with an emergency code that is safe. They are all stored in your wallet or purse.